Why do you need to clean gas stove burners?

Many housewives wonder: how to clean a gas stove at home? During the cooking process, its surface inevitably becomes contaminated: soot and carbon deposits form. It is necessary to choose the right cleaning products so that with their help the stove regains its former shine.

Thanks to the presence of an open surface, it is much easier to clean a gas stove from grease deposits than an oven. But this seemingly simple process has its own nuances. The correct choice of products and a practice-tested sequence of actions will help the housewife keep her assistant perfectly clean.

The biggest challenge will be cleaning the grille. Before starting work, you need to find out what material it is made of. There are only three options:

• cast iron (the slab grates of obsolete models are made from it);
• metal with enameled surface;
• steel.

Methods for cleaning a cast iron grate

Cast iron is the most difficult to maintain. If the grate located above the stove burners is made of it, it will not be easy to clean with water. Therefore, the help of a dishwasher is not required. If you scrape off grease deposits from a cast iron surface with a knife, scratches will inevitably remain on the metal, which will give the stove an unsightly appearance.

There are only two effective ways to get rid of old grease that has accumulated on a cast iron grate. The first involves thoroughly calcining the cast iron, which must be continued until the entire accumulated fat layer falls off in the form of dry crusts.

You can calcinate cast iron directly over the stove, but this is too troublesome and inconvenient way to get rid of fat and carbon deposits at home. Therefore, experienced housewives entrust this task to their husband, who can burn the metal with a blowtorch or over a fire. The most convenient way to do this is at the dacha or in any other secluded place in nature.

Many owners of modern gas stoves do not know how to effectively clean a gas stove and what products are best used for this purpose. The choice of the latter should be taken especially carefully so as not to damage the slab coating and remove all contaminants. From this article we will learn how to clean a gas stove at home, how to clean cast iron grates and handles of a gas stove, as well as other important parts on which dirt accumulates. Each device owner must adhere to certain rules during the cleaning process and follow the sequence of actions.

Before washing the gas stove and cleaning the dirty grate on the gas stove, it is necessary to disconnect the device from the gas supply, as this is required by safety regulations. This simple manipulation will prevent accidental gas supply and significantly reduce the risk of possible injuries and damage. Then you need to carefully remove the grille

— this part usually accumulates the most contaminants, including greasy deposits, which are especially difficult to remove.

You can clean the grate of a gas stove using popular folk methods. First, it must be placed in a basin or bathtub filled with hot water with the addition of laundry soap. Prepare your own soap solution

It’s not at all difficult: to do this, you need to dissolve pieces of 72% soap in 5-7 liters of water. In this case, the grate must be completely immersed in the solution.

A gas stove has special burners and electric ignition, which also accumulate a lot of grease and dirt. If the design of the device allows, they will need to be removed and immersed in a soapy solution along with the grill, where they will remain for several hours. Now it will be much easier to clean the free surface of the slab. First you need to collect food debris and simple dirt, which can be wiped off with a dry sponge with a hard surface.

or coarse fabric.

Every stove owner is always concerned with the question of how to clean the handles and how to wash these hard-to-reach parts. To do this, you will need special cleaning products and a little practical skills. If you have an oven, you will need to wash its internal parts and external parts.

You can buy any product suitable for cleaning a gas stove or use folk recipes, which will be discussed below.

Heat exchanger

The heat exchanger is one of the important components of any heating boiler. It is he who is responsible for the efficiency of transfer of thermal energy from the burner to the coolant. Heating the liquid leads to the deposition of salts on the walls of the heat exchanger, which reduces the efficiency of its operation and can lead to the following problems:

• failure of the circulation pump due to increased resistance due to the narrowing of the diameter of the pipes through which water moves;
• overheating caused by the inability of the equipment to effectively cool itself with return water;
• an increase in gas consumption and heating costs, which occurs due to a decrease in the thermal conductivity of the heat exchanger surfaces.

The quality of the liquid that is used in the heating system to transfer heat to radiators completely determines the frequency of flushing the heat exchanger. If you use distilled (maximum purified) water, the heat exchanger can be washed not annually, but once every 3-4 years. When circulating antifreeze in the system, cleaning should be done every 2 years.

But, according to the statistics of our specialists, it is advisable to carry out filter cleaning and preventive maintenance of pumps in the coolant circuit annually, so that your system does not fail on the coldest day.

Many owners of autonomous heating systems ask the question: “How to properly clean a gas boiler without resorting to the services of a specialist?” If we talk about the heat exchanger, the following methods can be used to clean it:

• Manual cleaning. The heat exchanger must be dismantled in accordance with the manufacturer's instructions. Then you can clean it with brushes and other tools. Manual removal of deposits is the most labor-intensive.
• Chemical cleaning of boilers using special solutions that can dissolve deposits. Special equipment is used - a booster. With its help, a cleaner is pumped through the heat exchanger. Pumping is carried out several times, which makes it possible to dissolve the salts and remove them from the heat exchanger. At the final stage, it is necessary to use a special solution to neutralize chemicals.
• Hydrodynamic flushing, in which water is pumped through the system under pressure (the heat exchanger is not dismantled). When using this method, the main thing is not to exceed the maximum possible pressure. Otherwise, there is a high probability of pipe rupture.
• Ultrasonic cleaning of boilers. This method is the most technologically advanced and allows you to return the heat exchanger to its purity and original functionality in the shortest possible time. Ultrasound is the most effective means of combating various deposits.

Everyone can figure out how to clean the heat exchanger of a wall-mounted boiler. However, modern equipment has a complex design, so dismantling its individual parts will not be easy. If you are not confident in your own abilities, you should contact a specialized specialist and not take risks, since the cost of a gas boiler is quite high, and its breakdown can cause significant damage to the budget.

The most popular folk methods

Not all owners of gas stoves know exactly how to clean a gas stove with their own hands and what is needed for this. Special folk remedies are suitable for those people who prefer not to purchase synthetic household chemicals, but to use safe and time-tested methods. Among the disadvantages of ready-made products, it is necessary to note their low level of safety, the ability to cause allergic reactions, as well as requirements for storage rules. You can also use them only with rubber gloves so as not to damage the skin of your hands.

If you still prefer synthetic products, it would be a good idea to learn about alternative and safer methods. A new cleaning and washing solution can be prepared at home using available materials

, which everyone is guaranteed to have. Often, such products remove dirt no worse than popular household chemicals, and they are completely safe for health. To clean the oven and gas stove from grease, you can use:

• Laundry soap dissolved in warm water;
• citric acid;
• vinegar essence;
• ammonia or ammonia-anise drops;
• baking soda.

With their help, you can clean and wash both tiles and other devices, such as a multicooker, washing machine, boiler, electric kettle, microwave oven, blender, juicer and much more.

How to remove fat

To wash the device as efficiently as possible and remove all dirt, you will need preliminary preparation. Using hot water poured onto the surface of the stove and baking soda, you can soften old dirt. The baking soda should be spread evenly over the damp surface of the device and then left for about 30-40 minutes. This simple method allows you to clean both the stove and the oven, the insides of which can also be scrubbed with soapy water. After some time, you can start cleaning; the soda and water must be removed from the surface with a soft sponge.

You should not use steel wool as they can seriously damage the surface; in addition to a sponge, it is best to use a toothbrush

or cotton swabs for the most difficult to reach areas, such as handles. For those who want to learn how to clean the grate of a gas stove, the best option is the homemade soap solution mentioned above. Excellent auxiliary agents are also vinegar essence, as well as lemon juice and acid; they can be used separately or together. A solution of ammonia and vinegar will help remove dried and burnt areas of the tile surface.

Cleaning the handles

Many device owners admit that it is very difficult to clean the handles of a gas stove, but at the same time a large amount of dirt always accumulates on them. Dirt usually accumulates in the most difficult to reach places, so we should talk about cleaning handles in more detail.

Many people are interested in the question of how to remove the handles? They should be removed following the instructions for the stove - as a rule, it says how to do this (if such a possibility exists at all).

The removable handles can be washed in the same way as the grill: by placing them in a container filled with a solution of laundry soap and leaving them for 30-40 minutes. After soaking, it will be much easier to remove the softened dirt. For the same purposes, it is quite possible to use vinegar essence.

, a couple of tablespoons of which dissolve in a liter jar of water. You need to wear gloves to use this cleanser so as not to damage the skin of your hands. The handles are boiled in the essence solution for 5-7 minutes, then the water is drained. Wait for the handles to dry naturally and screw them back on.

Unfortunately, not all models of household stoves are equipped with removable handles; in this case, other auxiliary items and tools are suitable, for example:

• toothpicks and cotton swabs;
• hard toothbrush;
• baking soda or soda ash;
• ammonia.

Each area to be cleaned must be treated with a damp sponge on which soda has been applied; usually even old stains are removed the first time, but if we are talking about hard-to-reach places, you will have to use cotton swabs

, soaked in a solution of ammonia.

Cleaning heating equipment from soot

If during the operation of a gas boiler the chimney becomes contaminated with soot, a protective system will be activated that will respond to a violation of draft efficiency. When such contaminants form inside the equipment, the automation does not work. The whole danger lies in the fact that as a result you can be poisoned by combustion products. It should also be noted that any contamination leads to malfunctions of the boiler equipment.

Removing soot from the inside is a less difficult task. To do this you will need the following publicly available tools:

• brushes for metal and soft;
• screwdriver;
• rags;
• open-end wrenches;
• brush.

The burner, nozzles, tubes, gas ducts, heat exchanger swirlers and other elements on which soot was discovered during disassembly of the boiler must be cleaned from soot. Particular attention should be paid to the process of cleaning the injectors. It is necessary not only to clean the outer surface, but also to tidy up the inner surface. To do this you will need a thin needle. You must act very carefully so as not to increase the diameter of the nozzle. Otherwise, the combustion mode will be disrupted.

After cleaning, you should carefully reassemble it step by step, following the manufacturer's instructions. Timely cleaning of the boiler heat exchanger and its other elements will ensure:

• operational efficiency;
• economical gas consumption;
• safety of residents.

Oven cleaning methods

To clean the oven correctly and completely remove all dirt the first time? It is worth using special means at hand that you need to prepare yourself in advance. For fans of traditional cleaning methods, there are recipes that have proven themselves over the years of use, which will also be useful for those who want to learn how to clean the burners on a gas stove.

1. The internal surfaces must be scrubbed with a soap solution
   applied to a sponge, which is best left for 15-20 minutes - this manipulation will help dissolve old fat.
2. To clean the baking sheet and internal parts, you can pour the same solution into it and put it back in the oven, turn it on, set the temperature to 120 degrees and leave for half an hour. After time, all internal parts must be wiped with a soft cloth.
3. Another good way is cleaning with soda or citric acid
   . One of the products should be dissolved in warm water and applied to the oven walls, then wait 15-25 minutes and wipe with paper or newspaper, rinse with water.
4. Light stains inside are quickly removed with an aqueous solution of vinegar
   , which is prepared in a 1:1 ratio. To clean, you need to set the oven to 50 degrees and wait 15 minutes, then softened dirt can be easily removed with a sponge.

Tools you will need for cleaning

Initially, it should be understood that cleaning the burner can be carried out exclusively using a mechanical approach. That is, from improvised means it is necessary to build something like a ramrod.

To clean the burner correctly, it is recommended to first understand how it functions.

The gas burner is placed on top of the gas cylinder. Due to the pressure inside the cylinder, the gas escapes from the hole at high speed.

Along the way, it manages to mix with oxygen, which is sufficiently contained in the surrounding air. It is thanks to this that the redox reaction (combustion) becomes possible.

The cleaning procedure is as follows:

• There should be no open fire nearby, as well as high-temperature devices (soldering irons, etc.);
• the burner is disconnected from the cylinder;
• Using a homemade cleaning rod, systematic cleaning of the inner surface of the tube through which fuel is supplied is carried out.

As mentioned above, this technique is suitable not only for construction tools, but also for small tourist burners.

Burner cleaning

The burners of the Hephaestus gas stove and devices of other brands also need to be cleaned, and only experienced stove owners can do this task. Each burner consists of several parts, the list of which includes:

• nozzle or removable jet;
• flame breaker;
• protective cover.

You should always promptly clean the burners of a gas stove from carbon deposits; they can be removed quite easily, they can be disassembled and all parts can be washed separately. The burner covers can be cleaned with a soapy solution and rubbed with a toothbrush if it is heavily soiled.

Since the burners are made of aluminum, they must be cleaned with chlorine- and acid-free products and should not be soaked.

Before cleaning the nozzle, be sure to turn off the gas supply; if the holes are clogged, they must be cleaned with a thick needle or wire. If necessary, you can remove the thermocouple. You can perform this procedure yourself or call a specialist from the gas service. In general, cleaning the gas stove grate and the entire device does not take much time if you do everything correctly and use proven products. Now you know exactly how to clean the grate on your gas stove, oven and other appliance parts.

Hello dear readers of the site “House Economics”! In every home where a gas stove is installed, over time the question of cleaning it necessarily arises. But everyone decides it in their own way. Some people clean it themselves, some ask a knowledgeable friend, and some call a gas technician. In general, the situation is banal and it would not be worthwhile to “fence the forest,” but if you are reading this article, then you need it, so let’s look at how it’s done.

Technical reasons

Gas boilers will need cleaning if the following phenomena related to the technical component occur to them:

• insufficient temperature in the room or space that the boiler should provide;
• increased consumption of electricity and gas;
• the appearance of a burning smell in a room or premises.

Such failures are usually caused by clogging. To get rid of the above problems, first of all try to clean the most important part of gas boilers - the burner.

How do you determine when your gas stove needs to be cleaned?

• The burners began to burn poorly.
• The flame in the burners constantly changes color and shade.
• Soot appeared on the dishes.
• All taken together.

Then the direction has been chosen correctly, and we can no longer be turned away from this path. In general, the procedure for cleaning and technical inspection of our home “helper” should be carried out at least once a year. Of course, depending on the degree of clogging - or even more often. After all, any equipment requires not only careful operation but also competent technical care.

To clean the stove, first we need to remove the top cover - the panel.

In different models of kitchen gas stoves, it is removed in different ways - in our case, we will try to convey the main thing to the reader.

First of all, you need to clear debris and greasy deposits on the internal surfaces of the stove and clean the tubes. Then tighten all threaded connections on the tubes and the plate frame with a wrench. If before, the stove smelled of gas, you need to replace the gaskets on the connections, they cost pennies, and it won’t hurt to once again secure your home. Moreover, there is nothing complicated in changing them, you just need to unscrew the nut on the connection, pull out the old gasket and replace it with a new one, and of course screw everything back. And you shouldn’t tighten it tightly; new gaskets can be tightened slightly and after a while they can be tightened a little more, so their service life will last much longer.

The next and perhaps most important step will be cleaning the nozzles in the stove.

Take a piece of thin, soft wire and, with slight rotations to the right and left, insert it into the nozzle hole as shown in the photo. After making several rotational movements and feeling that the wire in the hole has begun to rotate more easily, turn on the gas burner with your other hand and pull out the wire. The point is that when you pull the wire, the released gas will not allow you to close the nozzle hole at this moment.

You cannot clean injectors with hard steel wire, much less with a needle.

The nozzle is made of soft metal and its opening is very important. The larger the hole, the greater the gas output. If you break the edges with hard steel, you will end up with a roaring burner and a bevel in the direction of the flame. And the needle can easily break in the hole and then you will definitely have to change the nozzle. (which was already a sad experience).

If you think that the burner is not burning hot enough, or, conversely, too hot, adjust the nozzle. This is done quite simply, with a socket wrench, turn it slightly to the right or left, depending on your needs.

After the cleaning and adjustment work is completed, you can check the quality of cleaning. We insert the burner into the socket, turn it on at half power, light it and admire the work done. When all the burners have been checked and you are satisfied with the result, close the lid in the reverse order.

Cleaning the oven.

To get complete satisfaction from the work done, you need to complete the job, in our case, completely clean the gas stove. We open the oven, take out all the contents - our goal is to get to the burner - the divider.

The stove is the most difficult appliance to clean in the kitchen, especially if it is gas. Indeed, unlike an electric one, it has a grate made of heavy cast iron, burners that periodically become clogged, and handles that very quickly become dirty with grease. Stationary gas stoves also have an oven and drying cabinet, a back panel or a lid. In this material, you will learn how to clean a gas stove at home from grates to buttons, as well as how to make cheap and super-effective cleaning solutions with your own hands.

The filter cannot be removed

The drain trap in washing machines is sometimes impossible to reach. There are a variety of situations: the handle does not turn, or the catcher is stuck in the socket and cannot be removed. This state of affairs is caused by the lack of regular or at least periodic maintenance (prevention) of the drainage unit.

If the drain filter does not unscrew, this can be explained by the presence of a foreign body or scale formed between the threads and the seal. Our experts offer to solve the problem step by step.

First, the blocked filter can be unscrewed using a carpenter's tool (pliers). Actions must be careful and unhurried. If the first method does not bring the desired result, cleaning can be done after removing the pump.

The procedure requires following the correct sequence of actions. In different models (brands), to start the activity you need to unfasten one of the walls of the device case (front, back). Next, you need to disconnect the wiring, unfasten the clamps connecting the volute to the pipe and flexible drain tube. Next you need to remove the hydraulic device with the snail. It is easier to clean the drain catcher through the holes of the drain pipe or pump (after disconnecting the pump from the volute).

Important! The option of cleaning the drain trap through a drain pump is quite complicated and requires specialized knowledge. To be confident in the quality of the events, it is recommended to trust them to professionals.

If all of the above operations are unsuccessful and the filter cannot be removed, perhaps you are doing something wrong or your machine has some kind of individual feature. Don't break anything, invite a specialist and he will solve your problem.

Interesting:

• Cleaning the drain pump in a washing machine with your own hands
• Do-it-yourself disassembly of the Ariston washing machine
• Review of built-in dishwashers Ariston 45 cm
• How to repair a Bosch washing machine
• How to install a washing machine in the bathroom yourself
• How to clean an LG washing machine filter

Reader comments

• Share your opinion - leave a comment

Folk remedies in the fight against pollution: time-tested

The modern chemical industry offers a lot of products that can easily and quickly clean your stove from any contaminants. But lately housewives have been suspicious of such substances. There are several reasons for this: such products can be expensive, they are unsafe and therefore require special storage (which becomes more important if there are children in the house), and it is recommended to use them with rubber gloves.

The stove can be perfectly cleaned using folk remedies

It is important for women that such products, even with protection, negatively affect the skin of the hands, which means they need to use creams. This adds expense to the already considerable cost of cleaning gels and powders. In addition, we have all encountered this situation: the stove needs to be cleaned urgently, but the industrial product has run out. And running to the store is not an option. This is where long-known and used tools that are probably always at hand will come to our aid:

• laundry soap solution;
• lemon acid;
• vinegar;
• ammonia alcohol;
• baking soda;
• ammonia-anise drops.

Almost all of these products will easily help you cope not only with dirt on the gas stove, but will also clean almost all household devices to a shine - a refrigerator, boiler, electric kettle, washing machine, juicer. They can handle any dirt, and their most important advantage is that they can be used safely even with children.

Cleaning Sequence

1. First of all, disconnect the stove from the gas supply. This will be necessary to ensure that you do not accidentally turn the gas supply knob to the burner. If the stove has an ignition button that is powered by electricity, then you need to disconnect the stove from the power source. This way you will protect yourself from injury.
2. Now remove the grill. It should be placed in a large container (for example, a bathtub or basin of a suitable size) and completely filled with hot soapy solution. To prepare it, dissolve 72% laundry soap flakes in water (at the rate of ¼ soap bar per 5-7 liters of water). Make sure the grate is completely covered with the solution. Leave for several hours.
3. Remove the burners (if the design of the stove allows for their disassembly) and send them to soak in a basin with a grate for the same time.
4. While the grate and burners are soaking, remove any remaining food, crumbs, or other dirt from the surface of the stove that can be easily removed dry. Do not wet the stove for this, otherwise cleaning will be delayed. Use a kitchen sponge with a hard side or a thick cloth for this.
5. Cleaning the handles of the stove from dirt is perhaps the most difficult stage of the work. These elements become clogged especially intensively and have many hard-to-reach places. We will describe this process in detail below.
6. If you don’t have a hob, but a full-fledged gas stove with an oven, then you know how difficult it can be. We will also look at cleaning the oven in detail to make it easier for you to choose the most convenient method.

Usually, all elements need to be removed from the surface of the stove for thorough cleaning.

The stove has been disassembled, which means the preparatory stage is completed. Now we'll get to work.

How to clean a gas boiler in several simple ways

A gas boiler installed in a house for heating and water heating, like any other mechanism, requires care and maintenance. One of the main procedures to ensure long-term and uninterrupted operation of the device is its cleaning before and after the heating season. This includes:

If you have no idea about the internal structure of the boiler, then call a specialist

It is possible to wash the heat exchanger at home, but you need to know and follow some rules. The duration of cleaning depends on the thickness of the layer of organic and mineral deposits and lasts 1.5 – 4 hours. When choosing a cleaning method, one must be guided by the degree of contamination, the availability of special equipment and reagents.

Removing grease stains from the surface

The first assistant in the fight against greasy stains is hot water. Of course, it will not completely break down fat, especially old and dried-on fat, but it will be able to soften it. After this, soda comes into play. Distribute it evenly over the surface of the stove, generously moistened with hot water, and leave for half an hour. The effect will be enhanced if you use a soap solution.

After the slab has soaked, thoroughly wipe off the applied mixture with a soft sponge. Now wipe the surface with a 1:1 solution of water and ammonia.

Attention! Do not use metal brushes or sponges. You will scratch the surface with them, and subsequent contaminants will settle much more firmly on the damaged areas. If a regular sponge doesn't do the job, use a toothbrush. A cotton swab will help clean hard-to-reach places.

Use laundry soap for cleaning. Rub part of the bar and add some hot water. Mix to a paste and apply evenly to the surface. Leave for 15 minutes, and when the fat has subsided, rinse with warm water. Wipe off any remaining product with a clean cloth.

A toothbrush will help clean hard-to-reach places

Lemon juice, vinegar and citric acid will also be effective helpers against fat. Apply any of these products to the entire surface of the stain and wipe off after 15-30 minutes. Also, burnt areas or dried grease stains will be destroyed by a solution of vinegar and ammonia.

It is much easier to deal with if there are stains on your stove from syrup, coffee or cocoa containing sugar. In this case, regular hot water will help you. At high temperatures, sugar turns into caramel, which is difficult to clean, but easily dissolves in water in just 15-20 minutes.

Cleaning the stove handles

The handles on a gas stove, as the smallest and most frequently used elements, get dirty quickly. In addition, due to the design, pollution settles in hard-to-reach places.

The easiest way to clean the removable handles. To do this, just take them out and put them in a container with a cleaning agent. These parts need to be kept in a concentrated solution of laundry soap for quite a long time, depending on the degree of contamination, about 8 hours. But during this time, fat and dried food particles will completely soften and remove from the surface.

Stove handles can be the hardest to clean.

If you want to speed up the process, use vinegar essence diluted with water (2 tablespoons of the substance per 1 liter of water). Don't forget to wear rubber household gloves! The solution should completely cover the handles. Boil them for 5-7 minutes, drain the solution and leave the pan with the handles to cool. Don't try to cool them with cold water. When the parts have cooled completely, clean them with a sponge. You can use baking soda on special occasions.

It is more difficult if the handles on the stove are not removable. In this case, you will need patience, and the following will come to your aid:

• toothpicks;
• cotton buds;
• Toothbrush;
• soda (preferably not baking soda, but ash, if the contamination is too strong);
• ammonia.

First, put a little baking soda on a damp sponge and wipe the handles thoroughly. After that, get to work on hard-to-reach gaps. Here it is better to use ammonia. Dilute it in water in a 1:1 ratio and apply it to the gaps with a cotton swab, rubbing well. After 10 minutes, dissolved dirt can be easily wiped off with a damp cloth or sponge. Remove any remaining residue with a toothpick.

How to Clean Your Oven Effectively

1. Wipe the oven thoroughly with a paper towel. Wet the inner walls with soapy water and leave for 15-20 minutes to soak the fat a little. After this, pour a weakly concentrated soap solution into a baking tray and place it in the oven. Set the temperature to 120 degrees and leave the oven with the door tightly closed for 30 minutes. All contaminants will melt and dissolve in the hot steam. After this, the oven must be thoroughly wiped with a soft cloth and rinsed with clean water.
2. Soak baking soda or citric acid in water and apply this product to the moistened inner surfaces of the oven. Leave for 15-25 minutes, depending on the degree of contamination, and then wipe thoroughly with a paper towel and rinse with water.
3. If the stains are minor, then an aqueous solution of vinegar in a 1:1 ratio can handle them. Moisten the inner walls generously with it, turn on the oven at 50 degrees and leave for 15 minutes. After this, wash off all dirt with clean water.
4. This folk remedy will help remove more serious stains. Apply the vinegar solution in the same proportion to the oven walls and sprinkle with baking soda. During the reaction of baking soda with vinegar, fat and dried food residues will fall away from the surface. Instead of vinegar, you can use citric acid to avoid a strong odor.
5. Ammonia also works well on stains. Generously rub the inside of the oven with it, close the door and leave for 10 hours, for example, overnight. In the morning, the oven must be thoroughly rinsed with clean water so that the smell of ammonia completely disappears.
6. Pour 200 ml of ammonia into a baking tray and add water. Place in the oven for half an hour. All dirt can be easily wiped off with a sponge and soapy water.
7. Sprinkle the inside of the oven with a thick layer of salt and leave to preheat at 100 degrees for 30 minutes. Allow the oven to cool, sweep out the salt and any remaining dirt and rinse the surfaces with cold water.
8. Prepare a simple but very effective paste: mix equal parts of salt, baking soda and water. Apply the product to the surface that is dirty and leave for 10 hours. After this, rinse off the residue with cold water.

Dry screed

Skirting boards and thresholds

Laminate