Which storage water heater Ariston to choose for an apartment

The Ariston water heater is represented by a fairly wide range of plumbing fixtures and corresponding standard model lines.

On this topic:

How to choose a walk-behind tractor for the garden

Aug 14, 2018

How to choose a chainsaw: practical advice

Aug 13, 2018

Which water heaters are best suited for a summer cottage?

Nov 3, 2017

Installation and wiring of a water heater

Jun 17, 2017

BACK FORWARD 1 of 18

The products of this brand have the following categories:

• traditional boilers;
• floor boilers;
• condensing boilers;
• floor boilers;
• boilers with indirect heating;
• gas instantaneous water heaters;
• water heaters equipped with heat pumps;
• gas storage water heaters;
• electric water heaters with storage function.

Each device is equipped with heating elements, control devices and additional accessories.

Where to begin?

Of course, from mounting the boiler on a supporting surface and arranging a drain from the cold branch of the home water supply.

The last operation - arrangement of the outlet - is carried out as follows:

• A separate branch of cold water supply is routed from the collector to the intended location of the boiler using ½-inch fittings.
• If the system does not have a collector, then you need to divide the section of the water supply system closest to the boiler by installing a standard tee at the cut site.
• The installation pattern of the tee depends on the structural material of the pipes. That is, plastic tees are fixed using a pipe soldering iron, metal fittings are attached to the thread, pressing the joint with a lock nut, fittings for metal-plastic pipes are mounted on collet clamps.
• A ball valve is installed at the free end of the tee or a specially equipped branch of the water supply system, shutting off the cold water supply.

Installing the boiler on a supporting surface is even easier:

• A counter plate is applied to the wall - a part from a standard set for mounting a boiler - it is aligned with the hydraulic level and the dowel placement points are marked.
• At the marked points, drill holes with a diameter of 16 millimeters and a depth of 80 mm using a drill or hammer drill. Then polymer inserts are driven into the holes.
• The counter plate is attached to the wall by driving the dowels from the kit into the inserts or screwing in self-tapping screws.
• The tank is hung on a bar using mounting brackets welded onto the boiler body.

To install the boiler, at least two counters are used, placed at a distance of 27-43 centimeters from each other.

How to connect an Ariston water heater to the electrical network

The next step is connecting to the power grid. Moreover, you will have to allocate a separate line for the boiler by installing a standard RCD included in the delivery set in the central distribution board.

Electrical diagram for connecting the boiler

The connection process itself is as follows:

• An RCD is installed in the shield, connecting its input to the output of the central automatic fuse.
• From the output of the RCD to the point where the boiler is placed, a three-core 2.5x3 cable is pulled, hiding the line in a groove or an external box.
• A 16 Ampere fuse is installed near the boiler, packaging this “switch” in a miniature cabinet with a removable front panel.
• The wire from the RCD is pulled to the input of the 16-amp fuse.
• The bottom cover of the boiler is removed and a three-core wire of the same cross-section - 2.5 mm - is connected to the contacts of the heating element.
• The wire from the boiler is connected to the fuse output.

The grounding line - a two-color core in the wire - is connected to the corresponding connector of the central panel. The phase line - a brown or red wire - is pulled from the phase of the central panel to the corresponding connector in the boiler. The “zero” line - the blue wire - is pulled from the zero bus in the panel to the desired connector in the boiler.

Connection via socket and plug is possible, but not recommended. In addition, a waterproof socket and plug are more expensive than a 16-amp machine, and their contact point is constantly heated.

Connection diagram of the Ariston boiler to the water supply

The next step is connecting the boiler to the water supply. Before doing this, you must disconnect the power supply line.

Connection diagram of the Ariston boiler to the water supply

After this you will have to do the following:

• Extend a vertical pipe with a diameter of at least ½ inch from the water supply shut-off assembly - the ball valve on the tee or elbow under the boiler - to the inlet of the water heater.
• Screw the American connector onto the “cold” fitting, the right one on the side of the front panel.
• Screw the drain valve onto the drain.
• Screw a one-way safety valve onto this fitting, reducing the inlet pressure to 6-7 atmospheres.
• Attach a filter to the lower end of the valve to reduce the water hardness level.
• Attach a vertical pipe from the valve on the water supply to the filter outlet.
• Install a check valve into the pipe to prevent hot water from draining into the cold water supply.
• Place a hose on the free end of the valve, leading it to the sink or sewer.

Cumulative

There are opening and closed water heaters.

Open

Open boilers are made from plastic. They are used only in individual water supply systems. The mechanism of operation is as follows: when liquid enters the container, it shuts off and heats up. Afterwards, excess water is pushed into the sink. There will be hot water only if there is cold water in the boiler. In this device, the entrance for cold water is made from below, for hot water - from above. Without cold pressure, hot water will not be able to enter the system. The water is not mixed, heating is done gradually.

Open type boilers - sectional view of the device

Closed

The closed type of water heater is used for different water supply locations. The heating container is made of metal, copper, stainless steel or enameled steel. The kit includes a fuse and two valves - collection and check valves. As pressure increases, the safety valve helps drain excess water. To prevent rust from appearing on equipment, manufacturers use anode protection.

Closed water heater design

Installation

The easiest way to install a floor model. To do this, you just need to choose a suitable place in the room. If the floor is uneven, you must first make a level screed or lay tiles.

Installation of wall models occurs in several stages:

• We mark places for fasteners. To do this, measure the distance between the holes for the hooks at the back of the water heater. We make marks on the wall with a marker, additionally using a level to ensure that the body hangs level.
• Holes for fastenings are drilled using a hammer drill. These can be either anchors or dowels with hooks. Depending on the weight of the device, the diameter of the fasteners is selected. For small boilers of 15 liters, 10 mm anchors are suitable, for devices of 30 liters - 12 mm.
  Read also:  How to insulate a garage from corrugated sheets? Stages
• Anchors are hammered in or dowels are inserted and hooks are screwed in. The case is hung on the wall.

Water supply

Next comes the connection to the water supply. A diagram is thought out, first drawn on a sheet of paper, and then transferred to the walls with real dimensions. Holes are drilled along the lines where the pipes will pass and clips are installed.

We close the valve at the water inlet and install a tee on the branch closest to the boiler. A pipe runs from it to the water heater. A valve is installed on it to make it convenient to repair the device, a strainer and a check valve.

We lead a flexible hose to the boiler and connect it to the pipe. Typically the input is indicated in blue. We draw a branch to the watershed point in the same way. It is not recommended to connect without flexible hoses. On the one hand, it looks better and more reliable, but if there are sudden changes in pressure, the tank takes the brunt.

The inlet to the boiler is marked in blue

After connecting all components, the valves are opened and all connections are checked for leaks. If they are detected, reconnections are made or more tow is added to the threads.

Conclusions and useful information

How to properly light a gas water heater - a detailed video review in the following video:

Review of new products in the line of geysers of the Ariston brand:

Ariston geysers are one of the most reliable water heating devices in the world.

In addition, they are extremely easy to operate and economical in fuel consumption. It is enough to realize how the device lights up in order to provide convenient and quick heating of running water for personal needs.

Do you heat water with an Ariston brand column and want to share with other users the secrets of the correct and safe operation of a gas water heater? Or do you have questions that we haven't touched on in this section? Ask them to our professionals and other website guests, leave yours - the contact form is located below.

Was the article helpful?

Gas instantaneous water heaters (column) are extremely comfortable in everyday life.

They provide rapid heating of water in as little time as possible. When used correctly, the dispensers are economical and unpretentious in operation, as they provide hot water at the owner’s request.

The trouble-free service life of a gas water heater is 10-15 years, but a gas water heater is a technically complex device that requires constant supervision from craftsmen. By neglecting to call professionals for annual maintenance, we bring the water heater to a critical state, which may break during operation and not turn on. As a geyser repair service, in this article we will describe in more detail the malfunctions of geysers and how to eliminate them.

Most geysers are equipped with a digital screen located on the front panel to display information about the condition of the heater.

At one point, a breakdown will cause the device to stop, and the main control board will display its error code.

For example: Bosch geyser: A0; F1; C7; EE and almost all other errors.

In some models, the user is notified of a breakdown in the form of a flashing indicator. First of all, this information is intended for the service worker. It shows the location and nature of the breakdown. When the gas water heater turns off and an error occurs, we advise you not to try to repair the water heater yourself, but to immediately contact a qualified specialist to service or replace the faulty unit.

***

Electrical connection

The scheme is also thought out in detail here. To connect less powerful models, you can use moisture-resistant sockets; powerful devices are connected with a separate cable, which is output to the machine.

It is important to use three-core copper wires with a cross-section of at least 2.5 mm. Additionally, for safety reasons, an RCD is installed on the cable to protect users from breakdowns. Remove the protective plastic cover from the bottom of the water heater and connect the wire in accordance with the markings on the device.

Next, the cable is led out in plastic boxes to the electrical panel and placed on the machine with the corresponding current rating. At the very end, the functionality of the connected Ariston boiler is checked. The taps open and the electricity turns on.

We invite you to watch a video about installing a water heater:

High-quality Italian products have been in deserved demand in many countries around the world for more than 70 years; they have been sold in Russia for more than 20 years. TM “Ariston” supplies water heaters of various types to Russia: instantaneous and storage, gas and electric. Installation of a gas water heater is carried out only by gas service specialists; an electric one can be installed independently.

Ariston water heaters are of very high quality, which is why they are popular among consumers.

Strengths of Ariston water heaters

The key advantages of Ariston boilers include fast heating of water, as well as the possibility of installation in both horizontal and vertical positions. Almost all models are characterized by compact size. Naturally, flat shapes are more popular, but, for example, the demand for the PRO ECO INOX PW V SLIM model, which has a cylindrical shape, is not much less. This device can also be easily installed in small bathrooms. In addition, Italian-made heating devices have many other positive qualities.

Advantages of Ariston boilers:

1. The presence of an ECO function that disinfects water and equalizes temperature.
2. Ag+ coating, which extends the service life of the boiler.
3. 7 years warranty against leakage on stainless steel tanks.
4. 5 years warranty on enamel tanks.
5. The presence of a magnesium anode, which effectively protects against the effects of scale and corrosion.
6. Availability of batch heating system.
7. Availability of ABS system. The system normalizes electricity consumption during surges and leaks.
8. Flat shapes of rectangular devices and narrow cylindrical tanks.
9. The presence of an additional heating element.

Most Ariston boilers are equipped with all protective systems (safety shutdown, bacterial protection, protection against overheating, water, etc.). These models include ABS PRO ECO PW, ABS PRO ECO PW SLIM.

Installation

Installing an Ariston water heater with your own hands is not difficult if you carefully read the instructions and follow its instructions. Of course, you can invite specialists who will do everything quickly and efficiently. The only “but” is the price of this service. For example, in Moscow it ranges from $100. Meanwhile, having minimal skills in working with plumbing, you can cope with this task in just 2-3 hours. Considering that you will spend some money on supplies, the net savings will be approximately $60.

Water heater connection diagram.

When assessing the pros and cons of installing a water heater with your own hands, take into account the risk of flooding your neighbors below; if something goes wrong, balance your strengths. The advantages of solving this problem yourself include:

• saving time and money;
• acquiring the skills you will need while operating the water heater.

Access to the storage water heater (boiler) must be absolutely free, and the wall for mounting must be strong, capable of supporting double weight (for a unit capacity of 50 liters, calculate the load of 100 kg). Determine the condition of your electrical wiring: is it capable of handling the significant additional load? For example, for a 2000 W water heater the copper wire cross-section should be 2.5 mm². Keep in mind that if there are old water pipes in the apartment, sometimes you have to first replace them and only then connect the boiler. Find out what amperage your electric meter is designed for. If it is less than 40 A, you will have to replace it too.

Water heater “Ariston”

It is very important to prepare in advance all the tools and consumables for the work. Before starting installation, make sure you have the following tools:

Tools for installing a storage water heater.

• roulette;
• hammer drill with drill;
• adjustable wrench;
• spanners;
• wire cutters;
• pliers;
• two types of screwdrivers.

• Unipack type paste or FUM tape;
• tow;
• 3 shut-off valves;
• 3 tees;
• 2 connecting flexible hoses (if not included);
• metal-plastic pipe of the required length.
• if it is necessary to replace the wiring - a three-wire wire, a socket or a circuit breaker.

To install a storage electric heater, you will need a 32-40 A circuit breaker and a PVS 3X6 -3X8 cable.

Boiler installation

Storage water heaters heat water for a certain time in special tanks from 10 to 150 liters or more. In small city apartments, boilers of 50 or 80 liters are most often installed. Fastening to a weak wall (for example, plasterboard) is excluded. There is no fundamental difference in installing a small or large tank, except that the larger the unit, the more powerful the fastening elements should be.

Scheme of a storage water heater.

Break the work into several stages. The main and most important stage is attaching the boiler to the wall. If the container is horizontal, it is advisable to attach it higher, under the ceiling, if vertical - at the level of the person’s head or chest. The floors under the boiler must be waterproofed in case of leakage.

Ariston water heater range

The operational properties of boilers have ensured their widespread use in dachas, private houses and apartments for supplying hot water when it is temporarily turned off or completely absent. But due to the diverse model range, even literate buyers need help when choosing a high-quality and reliable water heater that suits specific conditions.

Boilers are a tank with thermal insulation on the walls and a heating element or heating element inside. But each model has its own parameters that are responsible for the quality and reliability of the device.

Classification of Ariston products for heating water:

1. By displacement (30, 50, 65, 80, 100, 150 l).
2. According to the shape of the tank:

• cylindrical;
• rectangular;
• square.

1. According to the material used to make the tank:

• the outer casing is made of steel or plastic;
• inner casing made of stainless steel or enamel.

1. By type of heating element.
2. According to the version.

• for installation in horizontal position;
• for vertical installation.

The most popular are square and rectangular tanks with a capacity of 50 and 80 liters, which have a mechanical control system. Thanks to their small parameters, they take up less space and easily fit into the interior of the room. 50-liter boilers are suitable for families of 2 people; for 3-4 people it is advisable to purchase an 80-liter Ariston model. Water heaters with a volume of 100 liters are suitable for families of 5 or more people. It is recommended to use a metal frame for their installation, as they require reinforced fastening.

Most often, consumers pay attention to the VELIS INOX .
Thus, water heaters ABS VLS INOX QH, PRO ECO INOX PW V SLIM, ABS PRO R INOX, ABS PRO ECO PW, ABS Velis Power 50 and others are in particular demand on the market.

Connection to the water supply system

Hoses and other connection elements used for connection to the water supply must withstand a temperature of at least 80°C and the design pressure.

Table for determining the volume of a water heater.

Avoid directly joining two different metals, such as steel (in water pipes) and copper. Use a dielectric adapter.

Connect the water supply to the boiler through shut-off valves and then through flexible wiring. The cold water inlet pipe is marked with a blue mark. A valve must be mounted on it to relieve excess pressure in the system.

You can also install a tee valve with a drain valve attached to it in front of the shut-off valve. When carrying out repairs or maintenance, this will make it possible to quickly drain the water from the boiler. Seal the places of threaded connections with tow or FUM tape. Attach a flexible line to the outlet pipe that directs the heated water. After connecting, open the water and check the system for leaks, then connect to the power supply.

1. Connect the power supply wires of the Ariston water heater to the screw terminals of the thermostat.
2. When connecting, observe the phases - L, A or P1 - phase wire, N, B or P2 - neutral.
3. Connect the ground wire to the clamp on the water heater body.
4. Connect the test lamp terminals to the contacts.
5. Press the thermostat button.
6. Close the lid.
7. Before connecting to the network, check that the boiler is filled with water.

The electrical wire must be hidden in a corrugated material made of non-flammable material or in the wall. Installation of the boiler requires grounding, which cannot be done to metal objects or pipes: for example, water supply, sewerage, etc.

How to turn on an Ariston water heater

Under no circumstances should you turn on an empty heater!

For most household appliances, the following instructions are typical when turned on for the first time:

1. Open the cold water supply valve (not to be confused with the safety valve);
2. Open the hot water tap or lever from the mixer connected to the water heater;
3. Wait a certain amount of time to collect water;
4. When the heater's boiler is full, water should flow from the faucet;
5. Provide proper power to the device;
6. At first starts, the temperature should be set to the middle position; over time, the liquid temperature level is adjusted to save and quickly heat up;
7. Ariston electronic models are adjusted by buttons for the required heating level;

These steps must be performed by the installation wizard.

Due to inexperience, they forget to open the valve responsible for supplying hot water from the boiler. If it is not fixed in the desired position, the heated water from the device will flow into the riser of the house.

Beginning of work

Before starting work, you should once again make sure that the flange is strictly in the center. If it is slightly off to the side, install it correctly (loosen or tighten). After filling the tank with cold water, open the hot water outlet valve on the boiler to allow excess air to escape, then close it.

When the heating pressure is turned on, the light on the body of the water heater should light up. Sometimes the cold water hose heats up during operation. In some Ariston models, the temperature can be adjusted with a special knob connected to the thermostat using a screw. Economy mode is indicated on the unit with the letter “E”.

In the event of an unexpected breakdown or malfunction of the new water heater, you can contact a warranty repair workshop in your city. The usual warranty period for an Ariston boiler is 1-2 years, depending on the model (the same as for a Termex, Bosch or Nova Tech water heater). If before the expiration of this time you tried to open and repair the unit yourself, then most likely you will be denied free warranty service. Keep the warranty card issued by the store until the end of the warranty period.

Storage water heater from - the unit is quite simple to operate and reliable. If you strictly follow the instructions during installation and during further use, it will serve you faithfully for many years.

• Author: Maria Sukhorukikh
• Print

Rate this article:

1. 5
2. 4
3. 3
4. 2
5. 1

(0 votes, average: 0 out of 5)

Share with your friends!

Unique qualities of Ariston boilers

Rectangular boilers ABS VLS INOX QH are characterized by compact dimensions, regardless of the capacity, and complete installation versatility. The tank is made of stainless steel ( INOX ). The model is equipped with an additional heating element that accelerates water heating, Quick Heating (QH) and a rotating display that rotates 90 degrees. Thanks to QH technology, a small volume of water in the tank is heated instantly.

“The quick heating function allows you to heat water for showering 40% faster than the classic model: one press of the Quick button activates the accelerated mode. This becomes possible thanks to three heating elements inside the VelisQH series of water heaters "

The ABS Velis Power model has flat shapes that allow the device to be installed in any position. These models have improved design solutions and two tanks for heating water. Systems with two tanks (inlet and outlet) provide batch heating of water. When the boiler is turned on, the outgoing tank is first heated in accelerated mode, and in parallel with it, the water in the incoming tank is heated.

One of the economical models, judging by consumer reviews, is ABS PRO R INOX with a mechanical thermostat and external heating control. Due to one heating element, the boiler consumes less electricity. But heating of water with such a device does not occur as quickly as in ABS VLS INOX QH, which has three heating elements, and other models with two heating elements.

The second heating element not only allows you to quickly heat water, but also serves as a backup.

If one breaks down, the boiler will continue to work, albeit more slowly with one heating element. To extend the service life of element for the water heater and the walls of the tank, the manufacturers in ABS PRO R INOX installed a magnesium anode that protects against scale and corrosion.

The PRO ECO INOX PW V SLIM boiler has no less original characteristics. This water heater is equipped with a water pressure function, so it is suitable for any pressure level, as well as a special ECO designed for excessively contaminated water. Its goal is to destroy almost all microbes in the water. The SLIM model itself has a rather small diameter (353 mm), thanks to such a narrow profile, the boiler can be mounted in any niche. ECO system is provided in many Ariston models, including ABS PRO ECO PW, so the water of these devices is completely safe, even babies can be bathed in it.

VELIS EVO QH model will heat water for a shower in 29 minutes, and also saves energy thanks to a programmable microcontroller.

The CORETECH controller remembers the owner's heating time and temperature habits and changes them automatically to save money.

More details in the video: